{"title":"Jaguar XK Parts","description":"\u003cp\u003eFind replacement parts for the Jaguar XK — including ride height \u0026amp; level sensors and oxygen \u0026amp; lambda sensors. Every part is built to OEM specification and matched to Jaguar XK fitments by part number, so you can order with confidence. We stock 34 Jaguar XK-compatible parts, dispatched from the UK with next-day delivery and a 1-year warranty.\u003c\/p\u003e\u003cp\u003eNot sure if a part fits your Jaguar XK? Send us your registration or VIN and we'll confirm before you order.\u003c\/p\u003e","products":[{"product_id":"jaguar-xfr-xfr-s-xf-xk-xkr-front-air-level-sensor-6-pin-8w83-3c280-af-304-036","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XFR XFR-S XF XK XKR – 8W833C280AF","description":"\u003cp\u003eGet your Jaguar XFR Xfr-s XF XK XKR back to proper headlight beam alignment and air suspension control with this replacement ride height level sensor, also referenced in service manuals as the level sender or height sensor. Built to OEM specification, matching 8W83-3C280-AF, ECX-JG-000, 8W833C280, 8W833C280AE and 8W833C280BD.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283528524120,"sku":"89","price":57.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU89_987x2-8W833C280AF_updated_39bbd3a7-6410-41d0-9d71-cb4707c70bbf.jpg?v=1780910657"},{"product_id":"front-height-level-sensor-jaguar-xf-x250-42-2008-2015-c2d23152","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XF X250 – 2008-2015 – C2D23152","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a headlight level sensor or headlamp range sensor — on the Jaguar XF X250 (2008–2015) with this OEM-spec direct fit. Matching part numbers C2D23152 and C2D23151.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283528622424,"sku":"87","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU87_3_updated_8fb0b541-4273-436f-a4b3-bd8a32b51a92.jpg?v=1780908846"},{"product_id":"c2p15220-air-suspension-ride-height-sensor-rear-jaguar-xf-2008-2015-left-right","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XF – 2008-2015 – C2P15220","description":"\u003cp\u003eRestore proper headlight beam alignment and air suspension control on your Jaguar XF (2008–2015) with this direct-replacement ride height level sensor — also known as the height sensor, ride height sensor or headlight level sensor. Built to OEM specification and matching part numbers C2P15220.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283530293592,"sku":"62","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU62_985-C2P15220-3_updated_b0b174de-f021-47df-90a6-f7ac474c784d.jpg?v=1780836720"},{"product_id":"air-suspension-ride-height-level-sensor-c2p23816-fits-jaguar-xf-xfr-xkr-6pins","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XF XFR XKR – C2P23816","description":"\u003cp\u003eRestore proper headlight beam alignment and air suspension control on your Jaguar XF XFR XKR with this direct-replacement ride height level sensor — also known as the headlight level sensor, headlamp range sensor or suspension level sensor. Built to OEM specification and matching part numbers C2P23816.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283530490200,"sku":"60","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU60_3_updated_6d5d848e-b455-46fb-8599-02075e7f48ad.jpg?v=1780834190"},{"product_id":"c2p15219-rear-left-and-right-height-level-sensor-for-jaguar-xf-2008-2015","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XF – 2008-2015 – C2P15219","description":"\u003cp\u003eGet your Jaguar XF (2008–2015) back to proper headlight beam alignment and air suspension control with this replacement ride height level sensor, also referenced in service manuals as the level sender or height sensor. Built to OEM specification, matching C2P15219 and 8W833C279BE.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283531211096,"sku":"59","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU59_6_updated_55950258-37c5-4ba1-860f-7cfcd422d11c.jpg?v=1780834012"},{"product_id":"c2p15221-rear-left-right-suspension-height-sensor-jaguar-xf-5-2009-15","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XF – 2009-2015 – C2P15221","description":"\u003cp\u003eThis direct-fit ride height level sensor (level sender \/ height sensor) restores proper headlight beam alignment and air suspension control on the Jaguar XF 5 (2009–2015). Built to OEM specification and matching part numbers C2P15221 and ECX-JG-003.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283531604312,"sku":"7","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU7_C2P15221_-6_updated_724dd16c-da02-4745-bb1b-20a6ca36bd0e.jpg?v=1780747164"},{"product_id":"jaguar-xk-xkr-xf-xfr-front-ride-height-level-sensor-8w83-3c280-af-8w833c280","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XK XKR XF XFR – 8W833C280AF","description":"\u003cp\u003eThis direct-fit ride height level sensor (headlight level sensor \/ headlamp range sensor) restores proper headlight beam alignment and air suspension control on the Jaguar XK XKR XF XFR. Built to OEM specification and matching part numbers 8W83-3C280-AF, ECX-JG-000, 8W833C280, 8W833C280AE and 8W833C280BD.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283564470616,"sku":"89","price":57.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU89_987x2-8W833C280AF_updated_efee28ba-dfad-49e5-891d-eb6643f9e2a1.jpg?v=1780910674"},{"product_id":"air-suspension-height-sensor-front-l-r-jaguar-xf-xk-xfr-8w83-3c280-af-dl6tc","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XF XK XFR – 8W833C280AF","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a headlight level sensor or headlamp range sensor — on the Jaguar XF XK XFR with this OEM-spec direct fit. Matching part numbers 8W83-3C280-AF, ECX-JG-000, 8W833C280, 8W833C280AE and 8W833C280BD.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283564536152,"sku":"89","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU89_987x2-8W833C280AF_updated_ed31d10d-3623-4db9-b8c9-07b8f89c0d06.jpg?v=1780910692"},{"product_id":"jaguar-xk-50-v8-rear-left-and-right-suspension-height-sensor-2009-2014-c2p15221","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XK – 2009-2014 – C2P15221","description":"\u003cp\u003eGet your Jaguar XK (2009–2014) back to proper headlight beam alignment and air suspension control with this replacement ride height level sensor, also referenced in service manuals as the ride height sensor or headlight level sensor. Built to OEM specification, matching C2P15221 and ECX-JG-003.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283580625240,"sku":"7","price":57.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU7_C2P15221_-6_updated_81f11e51-138e-4f69-899f-75e161b69f62.jpg?v=1780747256"},{"product_id":"air-suspension-height-level-sensors-jaguar-xk-front-lr-2006-2014-c2d23152","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XK – 2006-2014 – C2D23152","description":"\u003cp\u003eRestore proper headlight beam alignment and air suspension control on your Jaguar XK (2006–2014) with this direct-replacement ride height level sensor — also known as the ride height sensor, headlight level sensor or headlamp range sensor. Built to OEM specification and matching part numbers C2D23152 and C2D23151.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283599761752,"sku":"87","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU87_3_updated_797ff96a-3256-4579-b853-457310de43b2.jpg?v=1780908865"},{"product_id":"front-left-right-air-suspension-height-level-sensors-jaguar-xj2010-18-c2d23151","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XJ – 2010-2018 – C2D23151","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a ride height sensor or headlight level sensor — on the Jaguar with this OEM-spec direct fit. Matching part numbers C2D23152, C2D23151 and XJ2010-18.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283600089432,"sku":"87","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU87_3_updated_3c52021a-3da3-4ec8-b729-435997ae2450.jpg?v=1780908883"},{"product_id":"front-left-right-air-suspension-height-sensors-jaguar-xf-xfr-xfr-s-c2d23152","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XF XFR XFR-S – C2D23152","description":"\u003cp\u003eRestore proper headlight beam alignment and air suspension control on your Jaguar XF XFR Xfr-s with this direct-replacement ride height level sensor — also known as the suspension level sensor, air suspension sensor or level sender. Built to OEM specification and matching part numbers C2D23152 and C2D23151.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283600187736,"sku":"87","price":41.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU87_3_updated_c3b738a5-2ca0-4e9a-9beb-da548f862751.jpg?v=1780909221"},{"product_id":"front-lr-air-suspension-height-level-sensors-jaguar-xj-xjr-xjr575-xj50-c2d23152","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XJ XJR XJR575 XJ50 – C2D23152","description":"\u003cp\u003eReplace your failing ride height level sensor — also called an air suspension sensor or level sender — on the Jaguar XJ XJR Xjr575 XJ50 with this OEM-spec direct fit. Matching part numbers C2D23152 and C2D23151.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283600220504,"sku":"87","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU87_3_updated_4db67369-5b18-4a0a-9456-51548e22f0a0.jpg?v=1780909240"},{"product_id":"jaguar-xf-xfr-xkr-xk-front-air-suspension-height-sensor-8w83-3c280-af-6-pin","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XF XFR XKR XK – 8W833C280AF","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a ride height sensor or headlight level sensor — on the Jaguar XF XFR XKR XK with this OEM-spec direct fit. Matching part numbers 8W83-3C280-AF, ECX-JG-000, 8W833C280, 8W833C280AE and 8W833C280BD.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283601629528,"sku":"89","price":57.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU89_987x2-8W833C280AF_updated_b0e85585-6bef-425f-ae97-6fcb915f0cf7.jpg?v=1780910993"},{"product_id":"front-left-right-air-suspension-level-sensor-for-jaguar-xf-xfr-xk-xkr-6-pin","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XF XFR XK XKR – 8W833C280AF","description":"\u003cp\u003eGet your Jaguar XF XFR XK XKR 6 back to proper headlight beam alignment and air suspension control with this replacement ride height level sensor, also referenced in service manuals as the headlamp range sensor or suspension level sensor. Built to OEM specification, matching 8W83-3C280-AF, ECX-JG-000, 8W833C280, 8W833C280AE and 8W833C280BD.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283601793368,"sku":"89","price":57.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU89_987x2-8W833C280AF_updated_3a0c2c39-7253-4554-add6-03141c20a032.jpg?v=1780911010"},{"product_id":"suspension-height-level-sensor-jaguar-xf-2008-2015-xj-xk-f-type-c2p15219-oem","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XF XJ XK F-Type – 2008-2015 – C2P15219","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a height sensor or ride height sensor — on the Jaguar XF (2008–2015) with this OEM-spec direct fit. Matching part numbers C2P15219 and 8W833C279BE.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283611132248,"sku":"59","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU59_6_updated_ba68c003-98ad-40d6-9a16-747f7e613268.jpg?v=1780834034"},{"product_id":"jaguar-xf-xk-xj-f-type-suspension-height-level-sensor-oem-c2p15219-8w833c279be","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XF XK XJ F-Type – C2P15219","description":"\u003cp\u003eGet your Jaguar XF XK XJ F-type back to proper headlight beam alignment and air suspension control with this replacement ride height level sensor, also referenced in service manuals as the air suspension sensor or level sender. Built to OEM specification, matching C2P15219 and 8W833C279BE.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283611230552,"sku":"59","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU59_6_updated_2d292bf2-7d3a-47e7-832e-8efea0b7708b.jpg?v=1780834054"},{"product_id":"height-level-sensor-suspension-c2p15219-8w833c279be-fits-jaguar-xj-2010-2018","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XJ – 2010-2018 – C2P15219","description":"\u003cp\u003eThis direct-fit ride height level sensor (ride height sensor \/ headlight level sensor) restores proper headlight beam alignment and air suspension control on the Jaguar XJ (2010–2018). Built to OEM specification and matching part numbers C2P15219 and 8W833C279BE.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283612541272,"sku":"59","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU59_6_updated_b914b712-f8e5-4abd-a822-d7e2e21190cc.jpg?v=1780834097"},{"product_id":"suspension-height-level-sensor-c2p15219-8w833c279be-fits-jaguar-xj-xf-xk-f-type","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XJ XF XK F-Type – C2P15219","description":"\u003cp\u003eThis direct-fit ride height level sensor (suspension level sensor \/ air suspension sensor) restores proper headlight beam alignment and air suspension control on the Jaguar XJ XF XK F-type. Built to OEM specification and matching part numbers C2P15219 and 8W833C279BE.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283612934488,"sku":"59","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU59_6_updated_8c9a168f-25ee-4e1a-aa36-ce4a84a59caf.jpg?v=1780834118"},{"product_id":"c2p15220-air-suspension-level-sensor-rear-jaguar-xfr-2010-2015-left-right","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XFR – 2010-2015 – C2P15220","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a ride height sensor or headlight level sensor — on the Jaguar XFR (2010–2015) with this OEM-spec direct fit. Matching part numbers C2P15220.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283667329368,"sku":"62","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU62_985-C2P15220-3_updated_c382a960-95f4-422e-867e-3b8ae21d36ed.jpg?v=1780836742"},{"product_id":"c2p15220-air-suspension-sensor-rear-jaguar-xkr-2010-2015-left-right-6-pin","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XKR – 2010-2015 – C2P15220","description":"\u003cp\u003eThis direct-fit ride height level sensor (ride height sensor \/ headlight level sensor) restores proper headlight beam alignment and air suspension control on the Jaguar XKR (2010–2015). Built to OEM specification and matching part numbers C2P15220.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283667362136,"sku":"62","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU62_985-C2P15220-3_updated_748ff16f-3528-4d3a-96cc-ef5637dd2c83.jpg?v=1780836764"},{"product_id":"c2p15220-air-suspension-sensor-rear-jaguar-xfr-s-2013-2015-left-right-6-pin","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XFR-S – 2013-2015 – C2P15220","description":"\u003cp\u003eThis direct-fit ride height level sensor (headlight level sensor \/ headlamp range sensor) restores proper headlight beam alignment and air suspension control on the Jaguar Xfr-s (2013–2015). Built to OEM specification and matching part numbers C2P15220.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283667755352,"sku":"62","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU62_985-C2P15220-3_updated_aca3e952-e5de-4f30-be34-52b8229b5ae7.jpg?v=1780837297"},{"product_id":"air-suspension-ride-height-sensor-jaguar-c2p15220-rear-xf-xfr-xfr-s-xk-xkr","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XF XFR XFR-S XK XKR – C2P15220","description":"\u003cp\u003eThis direct-fit ride height level sensor (level sender \/ height sensor) restores proper headlight beam alignment and air suspension control on the Jaguar. Built to OEM specification and matching part numbers C2P15220.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283667853656,"sku":"62","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU62_985-C2P15220-3_updated_eddeaa69-061f-4e3f-b64c-e38db32739f0.jpg?v=1780837319"},{"product_id":"air-suspension-level-sensor-front-fits-jaguar-xf-xfr-xkr-2006-2015-l-r-6pins","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XF XFR XKR – 2006-2015 – C2P23816","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a suspension level sensor or air suspension sensor — on the Jaguar XF XFR XKR (2006–2015) with this OEM-spec direct fit. Matching part numbers C2P23816.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283674308952,"sku":"60","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU60_3_updated_9996cc98-63fd-46da-ab23-c75905a75ac5.jpg?v=1780834209"},{"product_id":"ride-height-level-sensor-front-left-right-fits-jaguar-xf-xk-xfr-c2p23816-6pins","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar XF XK XFR – C2P23816","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a height sensor or ride height sensor — on the Jaguar XF XK XFR with this OEM-spec direct fit. Matching part numbers C2P23816.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283674407256,"sku":"60","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU60_3_updated_5a0f9d3b-5f5c-4c10-b5f4-d6e7a2191684.jpg?v=1780834230"},{"product_id":"air-suspension-ride-height-level-sensor-for-jaguar-front-left-right-c2p23816","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar – C2P23816","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a ride height sensor or headlight level sensor — on the Jaguar with this OEM-spec direct fit. Matching part numbers C2P23816.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283674472792,"sku":"60","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU60_3_updated_fd4fff50-cd0e-4a38-85bb-06c67e036d25.jpg?v=1780834248"},{"product_id":"for-jaguar-x-type-20-25-30-v6-xk-xk8-xkr-4-42-lambda-oxygen-sensor-upstream","title":"Oxygen Sensor – Before Catalyst – Jaguar X-Type XK XK8 XKR – C2C29250","description":"\u003cp\u003eThis direct-fit oxygen sensor (O2 sensor \/ lambda probe) restores correct air-fuel mixture, fuel economy and emissions performance on the Jaguar X-type. Built to OEM specification and matching part numbers 29250, C2C29250, C2C7359, 12588 and C2C12588.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing lambda or oxygen sensor will turn on the check engine light and commonly log fault codes in the P0130–P0167 range (sensor circuit and heater faults). Drivers typically notice a sudden drop in fuel economy, rough or fluctuating idle, hesitation under load, a sulphur or rotten-egg smell from the exhaust, and in many cases an MOT emissions failure. On modern diesels and direct-injection petrols, a stuck or slow-responding sensor can also push the engine into limp mode.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation with the correct factory connector — no diagnostic coding required. Most engines run a pre-cat (upstream) and a post-cat (downstream) sensor; cross-check your existing part number and the position on the exhaust to make sure you're ordering the right one. Apply a smear of anti-seize compound on the threads before fitting and torque to manufacturer spec. Standard 4 wire connector. Position: Front.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eHow do I know if my lambda sensor is faulty?\u003c\/h4\u003e\n\u003cp\u003eAn OBD2 scan showing P0130-series codes plus poor fuel economy is the clearest sign. Live data showing the sensor stuck at a flat voltage (instead of oscillating between roughly 0.1V and 0.9V) confirms a faulty sensor.\u003c\/p\u003e\n\u003ch4\u003ePre-cat or post-cat — which one do I need?\u003c\/h4\u003e\n\u003cp\u003ePre-cat sensors (upstream of the catalytic converter) control the fuel mixture. Post-cat sensors (downstream) monitor catalyst efficiency. Match the OEM number on your old sensor to the numbers listed above to be sure.\u003c\/p\u003e\n\u003ch4\u003eWill a new sensor fix my fuel economy?\u003c\/h4\u003e\n\u003cp\u003eIf the original sensor is biased lean or rich, a correct replacement typically restores MPG within a tank or two of fuel. Drive at least 20-30 miles after fitting to allow the ECU to re-learn.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283684893016,"sku":"218","price":58.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU218_234-9016_-8_updated_06c0f299-e245-4a9b-8993-92190cad7f9e.jpg?v=1781195736"},{"product_id":"post-cat-lambda-oxygen-sensor-fits-jaguar-xj-x350-303642-2003-09-c2c22679","title":"Oxygen Sensor – After Catalyst – Jaguar XJ X350 – 2003-2009 – C2C22679","description":"\u003cp\u003eReplace your failing oxygen sensor — also called a pre-cat sensor or post-cat sensor — on the Jaguar XJ X350 (2003–2009) with this OEM-spec direct fit. Matching part numbers 6R83-9G444-AB, C2C22679, C2C8442, 149100-8100 and 234-4951.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing lambda or oxygen sensor will turn on the check engine light and commonly log fault codes in the P0130–P0167 range (sensor circuit and heater faults). Drivers typically notice a sudden drop in fuel economy, rough or fluctuating idle, hesitation under load, a sulphur or rotten-egg smell from the exhaust, and in many cases an MOT emissions failure. On modern diesels and direct-injection petrols, a stuck or slow-responding sensor can also push the engine into limp mode.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation with the correct factory connector — no diagnostic coding required. Most engines run a pre-cat (upstream) and a post-cat (downstream) sensor; cross-check your existing part number and the position on the exhaust to make sure you're ordering the right one. Apply a smear of anti-seize compound on the threads before fitting and torque to manufacturer spec.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eHow do I know if my lambda sensor is faulty?\u003c\/h4\u003e\n\u003cp\u003eAn OBD2 scan showing P0130-series codes plus poor fuel economy is the clearest sign. Live data showing the sensor stuck at a flat voltage (instead of oscillating between roughly 0.1V and 0.9V) confirms a faulty sensor.\u003c\/p\u003e\n\u003ch4\u003ePre-cat or post-cat — which one do I need?\u003c\/h4\u003e\n\u003cp\u003ePre-cat sensors (upstream of the catalytic converter) control the fuel mixture. Post-cat sensors (downstream) monitor catalyst efficiency. Match the OEM number on your old sensor to the numbers listed above to be sure.\u003c\/p\u003e\n\u003ch4\u003eWill a new sensor fix my fuel economy?\u003c\/h4\u003e\n\u003cp\u003eIf the original sensor is biased lean or rich, a correct replacement typically restores MPG within a tank or two of fuel. Drive at least 20-30 miles after fitting to allow the ECU to re-learn.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283739255128,"sku":"213","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU213_2_updated_3470f029-6cec-461f-a41f-0d707255d78f.jpg?v=1781190271"},{"product_id":"rear-left-right-suspension-height-sensor-for-jaguar-xk-42-xkr-2006-14-c2p15221","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XK XKR – 2006-2014 – C2P15221","description":"\u003cp\u003eThis direct-fit ride height level sensor (suspension level sensor \/ air suspension sensor) restores proper headlight beam alignment and air suspension control on the Jaguar XK (2006–2014). Built to OEM specification and matching part numbers C2P15221 and ECX-JG-003.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 6 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283739582808,"sku":"7","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU7_C2P15221_-6_updated_23acf3c6-8236-45db-a2bd-fe59cf7f993a.jpg?v=1780747286"},{"product_id":"jaguar-s-type-x-type-xj-xk8-1996-2009-lambda-oxygen-sensor-o2-sensor","title":"Jaguar S-Type X-Type Xj Xk8 1996-2009 Lambda Oxygen Sensor O2 Sensor","description":"\u003cp\u003eGet your Jaguar S-Type X-Type XJ XK8 (1996–2009) back to correct air-fuel mixture, fuel economy and emissions performance with this replacement oxygen sensor, also referenced in service manuals as the oxygen probe or exhaust gas sensor. Built to OEM specification, matching 29250, C2C29250, C2C7359, 12588 and C2C12588.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing lambda or oxygen sensor will turn on the check engine light and commonly log fault codes in the P0130–P0167 range (sensor circuit and heater faults). Drivers typically notice a sudden drop in fuel economy, rough or fluctuating idle, hesitation under load, a sulphur or rotten-egg smell from the exhaust, and in many cases an MOT emissions failure. On modern diesels and direct-injection petrols, a stuck or slow-responding sensor can also push the engine into limp mode.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation with the correct factory connector — no diagnostic coding required. Most engines run a pre-cat (upstream) and a post-cat (downstream) sensor; cross-check your existing part number and the position on the exhaust to make sure you're ordering the right one. Apply a smear of anti-seize compound on the threads before fitting and torque to manufacturer spec. Standard 4 wire connector.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eHow do I know if my lambda sensor is faulty?\u003c\/h4\u003e\n\u003cp\u003eAn OBD2 scan showing P0130-series codes plus poor fuel economy is the clearest sign. Live data showing the sensor stuck at a flat voltage (instead of oscillating between roughly 0.1V and 0.9V) confirms a faulty sensor.\u003c\/p\u003e\n\u003ch4\u003ePre-cat or post-cat — which one do I need?\u003c\/h4\u003e\n\u003cp\u003ePre-cat sensors (upstream of the catalytic converter) control the fuel mixture. Post-cat sensors (downstream) monitor catalyst efficiency. Match the OEM number on your old sensor to the numbers listed above to be sure.\u003c\/p\u003e\n\u003ch4\u003eWill a new sensor fix my fuel economy?\u003c\/h4\u003e\n\u003cp\u003eIf the original sensor is biased lean or rich, a correct replacement typically restores MPG within a tank or two of fuel. Drive at least 20-30 miles after fitting to allow the ECU to re-learn.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283799581016,"sku":"137","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU137_c2c25956-11_updated_0e79cbd6-c45d-44b9-8ec0-8bec6f5a7dd9.jpg?v=1780939353"}],"url":"https:\/\/carpartclubs.com\/collections\/jaguar-xk-parts.oembed","provider":"CarPartClubs","version":"1.0","type":"link"}