{"title":"Land Rover Velar Parts","description":"\u003cp\u003eFind replacement parts for the Land Rover Velar — including ride height \u0026amp; level sensors, fuel pressure regulators and oxygen \u0026amp; lambda sensors. Every part is built to OEM specification and matched to Land Rover Velar fitments by part number, so you can order with confidence. We stock 14 Land Rover Velar-compatible parts, dispatched from the UK with next-day delivery and a 1-year warranty.\u003c\/p\u003e\u003cp\u003eNot sure if a part fits your Land Rover Velar? Send us your registration or VIN and we'll confirm before you order.\u003c\/p\u003e","products":[{"product_id":"air-suspension-sensor-jaguar-e-pace-front-left-right-3-pin-connector-t2h58352","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar E-Pace – T2H58352","description":"\u003cp\u003eThis direct-fit ride height level sensor (suspension level sensor \/ air suspension sensor) restores proper headlight beam alignment and air suspension control on the Jaguar E-pace. Built to OEM specification and matching part numbers T2H58352, T4A40679, LR178371, J9C3-3C280-AA and J9C3-3C280-BA. Also fits equivalent Land Rover models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283528163672,"sku":"79","price":67.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU79_5_updated_39a3a19c-3922-49b4-b70d-1a4308784a5f.jpg?v=1780865090"},{"product_id":"air-suspension-height-level-sensor-fits-jaguar-xf-rear-lr-t2h583512021-2023","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar XF – 2021-2023 – T2H58351","description":"\u003cp\u003eThis direct-fit ride height level sensor (headlamp range sensor \/ suspension level sensor) restores proper headlight beam alignment and air suspension control on the Jaguar XF. Built to OEM specification and matching part numbers T2H58351, T4A40681 and T2H583512021-2023. Also fits equivalent Land Rover models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283528196440,"sku":"43","price":67.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU43_1_updated_a2fcba1f-1a8f-4ff5-967e-6df3330efb3e.jpg?v=1780782555"},{"product_id":"suspension-height-sensor-fits-range-rover-velar-rear-lr-t2h58351-2018-2024","title":"Ride Height Sensor – Rear Left \u0026 Right – Range Rover Velar – 2018-2024 – T2H58351","description":"\u003cp\u003eThis direct-fit ride height level sensor (headlamp range sensor \/ suspension level sensor) restores proper headlight beam alignment and air suspension control on the Land Rover Velar (2018–2024). Built to OEM specification and matching part numbers T2H58351 and T4A40681. Also fits equivalent Jaguar models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283614245208,"sku":"43","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU43_1_updated_4bd8bf9c-2181-4529-af1d-f0480161d8ab.jpg?v=1780782574"},{"product_id":"height-level-sensor-jaguar-f-pace-xf-rear-left-right-t2h58351-t4a40681-2021-2023","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar F-Pace XF – 2021-2023 – T2H58351","description":"\u003cp\u003eRestore proper headlight beam alignment and air suspension control on your Jaguar F-pace XF (2021–2023) with this direct-replacement ride height level sensor — also known as the air suspension sensor, level sender or height sensor. Built to OEM specification and matching part numbers T2H58351 and T4A40681. Also fits equivalent Land Rover models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283614441816,"sku":"43","price":67.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU43_1_updated_a1697ff5-0014-447b-a628-bcb3b41e9560.jpg?v=1780782594"},{"product_id":"air-suspension-height-level-sensor-fits-range-rover-velar-rear-lr-l8a23c279ab","title":"Ride Height Sensor – Rear Left \u0026 Right – Range Rover Velar – L8A23C279AB","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a suspension level sensor or air suspension sensor — on the Land Rover Velar with this OEM-spec direct fit. Matching part numbers T2H58351, T4A40681 and L8A23C279AB. Also fits equivalent Jaguar models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283614540120,"sku":"43","price":67.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU43_1_updated_9838d0ff-e116-4953-85d6-2651a30fc29c.jpg?v=1780782613"},{"product_id":"air-suspension-height-level-sensor-jaguar-f-pace-x761-rear-left-right-t4a40681","title":"Ride Height Sensor – Rear Left \u0026 Right – Jaguar F-Pace X761 – T4A40681","description":"\u003cp\u003eGet your Jaguar F-pace X761 back to proper headlight beam alignment and air suspension control with this replacement ride height level sensor, also referenced in service manuals as the level sender or height sensor. Built to OEM specification, matching T2H58351 and T4A40681. Also fits equivalent Land Rover models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Left, Rear, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283614605656,"sku":"43","price":67.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU43_1_updated_599dd4b0-f604-4ec0-bde9-4dc306605b3f.jpg?v=1780782634"},{"product_id":"air-suspension-sensor-discovery-5-defender-90-110-130-front-l-r-t2h58352","title":"Ride Height Sensor – Front Left \u0026 Right – Land Rover Discovery 5 Defender 90 110 130 – T2H58352","description":"\u003cp\u003eThis direct-fit ride height level sensor (air suspension sensor \/ level sender) restores proper headlight beam alignment and air suspension control on the Jaguar. Built to OEM specification and matching part numbers T2H58352, T4A40679, LR178371, J9C3-3C280-AA and J9C3-3C280-BA. Also fits equivalent Land Rover models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283718742360,"sku":"79","price":67.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU79_5_updated_d26164be-f441-42d7-af67-c362ae62bce9.jpg?v=1780865186"},{"product_id":"air-suspension-sensor-range-rover-sport-front-left-right-3-pin-t4a40679-t2h583","title":"Ride Height Sensor – Front Left \u0026 Right – Range Rover Sport – T2H58352","description":"\u003cp\u003eReplace your failing ride height level sensor — also called an air suspension sensor or level sender — on the Land Rover Sport with this OEM-spec direct fit. Matching part numbers T2H58352, T4A40679, LR178371, T2H583 and J9C3-3C280-AA. Also fits equivalent Jaguar models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283718807896,"sku":"79","price":67.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU79_5_updated_d1a7859c-e529-4699-b905-82d951faaca0.jpg?v=1780865201"},{"product_id":"air-suspension-sensor-range-rover-velar-front-left-right-3-pin-lr178371-t4a406","title":"Ride Height Sensor – Front Left \u0026 Right – Range Rover Velar – T2H58352","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a level sender or height sensor — on the Land Rover Velar with this OEM-spec direct fit. Matching part numbers T2H58352, T4A40679, LR178371, T4A406 and J9C3-3C280-AA. Also fits equivalent Jaguar models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283719102808,"sku":"79","price":67.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU79_5_updated_594d66b0-a8cc-498a-a5d7-24ca388d5fd9.jpg?v=1780865214"},{"product_id":"air-suspension-sensor-jaguar-f-pace-front-left-right-3-pin-connector-t4a40679","title":"Ride Height Sensor – Front Left \u0026 Right – Jaguar F-Pace – T2H58352","description":"\u003cp\u003eReplace your failing ride height level sensor — also called a headlamp range sensor or suspension level sensor — on the Jaguar F-pace with this OEM-spec direct fit. Matching part numbers T2H58352, T4A40679, LR178371, J9C3-3C280-AA and J9C3-3C280-BA. Also fits equivalent Land Rover models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing ride height sensor commonly causes xenon, LED or matrix headlights to point too high (dazzling oncoming drivers) or too low (reducing your night-time visibility), and often disables auto-levelling entirely. On VAG group cars expect dashboard headlight error messages and fault codes B106A or B107A; on cars with air suspension you'll see the suspension warning light, uneven ride height, or the vehicle stuck low after parking. Faulty sensors also cause MOT fails on the headlamp aim test.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation, no diagnostic coding required. The same physical sensor is shared across the VAG group (Audi, VW, Skoda, Seat) on many platforms — the quickest way to confirm fit is to match your existing part number to one of those listed above. Mounting bracket and linkage are typically reused from your original sensor. Standard 3 pin connector. Position: Front, Left, Right.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this a headlight sensor or an air suspension sensor?\u003c\/h4\u003e\n\u003cp\u003eSame physical part — most VAG group cars use one sensor whose signal feeds both the auto-levelling headlight ECU and (where fitted) the air suspension control module. Replacing it fixes both systems.\u003c\/p\u003e\n\u003ch4\u003eWill replacing it stop the dashboard warning?\u003c\/h4\u003e\n\u003cp\u003eYes — once the new sensor is fitted and the ignition cycled, headlight error messages usually clear on their own. Stubborn faults can be cleared with VCDS or any generic OBD2 scanner that supports module reset.\u003c\/p\u003e\n\u003ch4\u003eDo I need to calibrate the headlamps after fitting?\u003c\/h4\u003e\n\u003cp\u003eBasic aim adjustment is recommended after replacement; full electronic calibration is only required if the headlamp unit itself was also replaced.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283719987544,"sku":"79","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU79_5_updated_3785be04-0d5e-4c7a-8399-9a86a56c3e6f.jpg?v=1780865229"},{"product_id":"jaguar-f-type-xf-xj-x351-30-50-v8-lambda-oxygen-o2-exhaust-sensor-lr035748","title":"Oxygen Sensor – After Catalyst – Jaguar F-Type XF XJ X351 – LR035748","description":"\u003cp\u003eReplace your failing oxygen sensor — also called an O2 sensor or lambda probe — on the Jaguar F-type XF XJ X351 with this OEM-spec direct fit. Matching part numbers DX23-9G444-FA, C2D54167, 0258030398, LS30398 and 0258030460. Also fits equivalent Land Rover models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing lambda or oxygen sensor will turn on the check engine light and commonly log fault codes in the P0130–P0167 range (sensor circuit and heater faults). Drivers typically notice a sudden drop in fuel economy, rough or fluctuating idle, hesitation under load, a sulphur or rotten-egg smell from the exhaust, and in many cases an MOT emissions failure. On modern diesels and direct-injection petrols, a stuck or slow-responding sensor can also push the engine into limp mode.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play installation with the correct factory connector — no diagnostic coding required. Most engines run a pre-cat (upstream) and a post-cat (downstream) sensor; cross-check your existing part number and the position on the exhaust to make sure you're ordering the right one. Apply a smear of anti-seize compound on the threads before fitting and torque to manufacturer spec. Standard 4 wire connector. Position: Rear, After Cat.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eHow do I know if my lambda sensor is faulty?\u003c\/h4\u003e\n\u003cp\u003eAn OBD2 scan showing P0130-series codes plus poor fuel economy is the clearest sign. Live data showing the sensor stuck at a flat voltage (instead of oscillating between roughly 0.1V and 0.9V) confirms a faulty sensor.\u003c\/p\u003e\n\u003ch4\u003ePre-cat or post-cat — which one do I need?\u003c\/h4\u003e\n\u003cp\u003ePre-cat sensors (upstream of the catalytic converter) control the fuel mixture. Post-cat sensors (downstream) monitor catalyst efficiency. Match the OEM number on your old sensor to the numbers listed above to be sure.\u003c\/p\u003e\n\u003ch4\u003eWill a new sensor fix my fuel economy?\u003c\/h4\u003e\n\u003cp\u003eIf the original sensor is biased lean or rich, a correct replacement typically restores MPG within a tank or two of fuel. Drive at least 20-30 miles after fitting to allow the ECU to re-learn.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283735552344,"sku":"216","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU216_LR035748-6_updated_9ae6c0c6-b9c4-46fa-828f-447f4396c170.jpg?v=1781195365"},{"product_id":"for-fiat-ducato-iveco-daily-iv-v-30-d-hdi-fuel-pressure-regulator-control-valve","title":"Fuel Pressure Regulator – Fiat Ducato Iveco Daily IV V – 0928400757","description":"\u003cp\u003eGet your Fiat Ducato back to correct fuel rail pressure and stable engine running with this replacement fuel pressure regulator, also referenced in service manuals as the rail pressure regulator or fuel pressure control valve. Built to OEM specification, matching 0928400757, 71754808, BC3Q-9B395-CD, BC3Q-9B395-CC and 12641035. Also fits equivalent Citroën, Iveco and Peugeot models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing fuel pressure regulator commonly causes hard starting when hot, rough idle, hesitation under acceleration, poor fuel economy, and fault codes P0089, P0190, P0191 or P0192. On some vehicles you'll see fuel leaks at the regulator body, or a strong fuel smell under the bonnet. Common-rail diesels with stuck regulators drop into limp mode under load. Petrol direct-injection engines may also show a rough cold start or misfire codes.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement, threaded into the fuel rail or pump body. Relieve fuel pressure before removal and have rags ready to catch residual fuel. Replace any sealing O-rings supplied. After fitting, cycle the ignition to prime, clear codes and test for leaks before driving. Standard 2 pin connector.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this the same as a fuel pressure sensor?\u003c\/h4\u003e\n\u003cp\u003eNo — the sensor measures rail pressure and reports to the ECU. The regulator physically controls rail pressure. Both can fail and produce similar fault codes, so confirm with live data before ordering.\u003c\/p\u003e\n\u003ch4\u003eCan I drive with a failing FPR?\u003c\/h4\u003e\n\u003cp\u003eShort distances yes, but unregulated fuel pressure damages injectors over time on common-rail diesels and causes excess emissions on petrol engines. Replace promptly.\u003c\/p\u003e\n\u003ch4\u003eDo I need to code or programme the new regulator?\u003c\/h4\u003e\n\u003cp\u003eNo — it's a passive hydraulic component. The ECU re-learns rail pressure within a few minutes of running.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283797451096,"sku":"235","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU235_928400757-3_updated_56124f7c-4099-4b98-af4d-70a26863387c.jpg?v=1781365207"},{"product_id":"new-for-land-range-discovery-v-sport-20-d-fuel-pump-pressure-regulator-valve","title":"Fuel Pressure Regulator – Land Rover Discovery V Sport – 0928400757","description":"\u003cp\u003eRestore correct fuel rail pressure and stable engine running on your Citroën with this direct-replacement fuel pressure regulator — also known as the FPR, fuel pressure regulator valve or rail pressure regulator. Built to OEM specification and matching part numbers 0928400757, 71754808, BC3Q-9B395-CD, BC3Q-9B395-CC and 12641035. Also fits equivalent Fiat, Iveco and Peugeot models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing fuel pressure regulator commonly causes hard starting when hot, rough idle, hesitation under acceleration, poor fuel economy, and fault codes P0089, P0190, P0191 or P0192. On some vehicles you'll see fuel leaks at the regulator body, or a strong fuel smell under the bonnet. Common-rail diesels with stuck regulators drop into limp mode under load. Petrol direct-injection engines may also show a rough cold start or misfire codes.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement, threaded into the fuel rail or pump body. Relieve fuel pressure before removal and have rags ready to catch residual fuel. Replace any sealing O-rings supplied. After fitting, cycle the ignition to prime, clear codes and test for leaks before driving. Standard 2 pin connector. Position: Engine Compartment.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs this the same as a fuel pressure sensor?\u003c\/h4\u003e\n\u003cp\u003eNo — the sensor measures rail pressure and reports to the ECU. The regulator physically controls rail pressure. Both can fail and produce similar fault codes, so confirm with live data before ordering.\u003c\/p\u003e\n\u003ch4\u003eCan I drive with a failing FPR?\u003c\/h4\u003e\n\u003cp\u003eShort distances yes, but unregulated fuel pressure damages injectors over time on common-rail diesels and causes excess emissions on petrol engines. Replace promptly.\u003c\/p\u003e\n\u003ch4\u003eDo I need to code or programme the new regulator?\u003c\/h4\u003e\n\u003cp\u003eNo — it's a passive hydraulic component. The ECU re-learns rail pressure within a few minutes of running.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283800498520,"sku":"235","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU235_928400757-3_updated_fd9df6c9-0d7a-46de-a47d-e8bda7d195a7.jpg?v=1781365317"},{"product_id":"0281006064-for-range-rover-sport-fuel-rail-high-pressure-sensor-30-d-l320-l494","title":"Fuel Rail Pressure Sensor – Range Rover Sport L320 L494 – 0281006064","description":"\u003cp\u003eRestore correct fuel rail pressure regulation and reliable starting on your Land Rover Sport with this direct-replacement fuel pressure sensor — also known as the fuel rail pressure sensor, FRP sensor or fuel pressure transducer. Built to OEM specification and matching part numbers BC3Q9F838AA, BC3Z9F838A, LR020693, 0281006064 and 9F838. Also fits equivalent Citroën, Jaguar and Peugeot models.\u003c\/p\u003e\n\u003ch3\u003eCommon signs of failure\u003c\/h3\u003e\n\u003cp\u003eA failing fuel pressure sensor commonly logs codes P0190, P0191, P0192, P0193 or P0194 (fuel rail pressure sensor circuit faults). Symptoms include hard starting (hot or cold), prolonged cranking, stalling at idle, hesitation under acceleration, intermittent loss of power, and on common-rail diesels the vehicle dropping into limp mode. A failed sensor can also cause the ECU to default to incorrect injection timing, hurting fuel economy and emissions.\u003c\/p\u003e\n\u003ch3\u003eFitment notes\u003c\/h3\u003e\n\u003cp\u003eDirect-fit replacement, no coding required after fitting. Relieve fuel system pressure before removal (depressurise via the dedicated fuse procedure on most cars). Use a new sealing washer or O-ring if supplied, and torque to manufacturer spec — over-tightening can crack the sensor body. Clear codes with any OBD2 scanner after installation. Position: Engine Compartment.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eCan I drive with a P0190 code?\u003c\/h4\u003e\n\u003cp\u003eShort distances only. A faulty fuel pressure sensor causes incorrect fuelling, which on common-rail diesel engines can damage injectors over time. Replace promptly.\u003c\/p\u003e\n\u003ch4\u003eIs this the same as a fuel pump?\u003c\/h4\u003e\n\u003cp\u003eNo — the pressure sensor measures fuel pressure in the rail and reports it to the ECU. The fuel pump is a separate component that actually moves fuel from the tank. They commonly fail together but are distinct parts.\u003c\/p\u003e\n\u003ch4\u003eDo I need to bleed the fuel system after fitting?\u003c\/h4\u003e\n\u003cp\u003eMost modern cars self-prime when you cycle the ignition. On older common-rail diesels, follow the service-manual bleed procedure to clear air from the high-pressure circuit.\u003c\/p\u003e","brand":"PitShopUK","offers":[{"title":"Default Title","offer_id":57283874259288,"sku":"123","price":47.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/3373\/0136\/files\/SKU123_LR020693-10_updated_f18d177e-01b2-4f05-bdd8-f9bbe4ab340c.jpg?v=1780928758"}],"url":"https:\/\/carpartclubs.com\/collections\/land-rover-velar-parts.oembed","provider":"CarPartClubs","version":"1.0","type":"link"}