Clock Spring – Nissan Navara Pathfinder Qashqai – B5567BH00A
Overview What this part does
Restore reliable airbag function and steering wheel controls on your Nissan Navara Pathfinder Qashqai with this direct-replacement airbag clock spring — also known as the spiral cable, squib or squib ring. Built to OEM specification and matching part numbers B5567-BH00A, 25560-5X21A, 25560-5X02E, 25560-5X03A and 25560-5X10C.
Common signs of failure
A failing clock spring or spiral cable typically triggers the SRS airbag warning light, disables the horn, and stops steering wheel audio, cruise and phone buttons from working. Some vehicles will also flag fault codes around the airbag module (e.g. B0014, B0028). Left unrepaired, the airbag and seatbelt pre-tensioner connections may not signal correctly in a collision — making this a safety-critical replacement and an automatic MOT fail in the UK.
Fitment notes
Plug-and-play installation, no diagnostic coding required after fitting. Multiple OEM variants exist for some platforms, so cross-checking your existing part number against those listed above is the quickest way to confirm fit. If your steering angle sensor is mounted on the clock spring, you may need to transfer it across — check your old unit before disposing of it. Position: Steering Wheel.
Frequently asked questions
What does a clock spring do?
It's the coiled ribbon cable inside the steering column that carries electrical signals between the steering wheel and the rest of the vehicle — keeping the airbag, horn, and steering wheel buttons connected as the wheel turns through its full lock-to-lock travel.
Can I drive with a faulty squib / clock spring?
The car will drive normally, but the SRS airbag system is disabled and steering wheel button functions may fail. UK MOT inspectors check for active SRS warning lights, so a faulty clock spring will fail your MOT.
Do I need to code or program this part?
No — direct plug-and-play. No diagnostic tool, VAG-COM, Techstream or BMW INPA coding required after fitting. Just centre the wheel before installation.
Specifications
- Type
- Airbag Clock Spring
- Position
- Steering Wheel
- OEM references
- B5567-BH00A, 25560-5X21A, 25560-5X02E, 25560-5X03A, 25560-5X10C, OEM25560-5X02E
- Warranty
- 1 year
- Coding required
- No coding needed
- Vehicle makes
- Nissan
Fits these cars3 compatible models
| Make | Model | Years | Engine |
|---|---|---|---|
| Nissan | CLOCK SPRING SQUIB RING Note to Buyer: Selling a high-quality clock spring without steering angle sensor perfect for replacing a worn or faulty unit. Designed to keep your airbag, horn, and steering wheel controls working reliably. Easy to install and tested for dependable performance. ✅ No steering angle sensor included (check your vehicle’s requirements for compatibility before purchasing.) ⚠ Important: This vehicle has few different clock spring types. Confirm the correct type for your model before ordering. BOXED. BRAND NEW. BUILT TO LAST. HASSLE-FREE INSTALLATION – PERFECT FIT, NO MODIFICATIONS NEEDED TO AVOID RETURNS, PLEASE CONFIRM FITMENT BY MATCHING THE OEM NUMBER, PLUG TYPE, AND IMAGES WITH YOUR ORIGINAL PART. NOT SURE IT FITS? JUST DROP US YOUR REG OR VIN AND WE’LL DOUBLE-CHECK. Designed for these models NAVARA -D40 | 2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014 | |
| Nissan | Pathfinder -R51 | 2005,2006,2007,2008,2009,2010,2011,2012,2013 | |
| Nissan | Qashqai - J10 +2 | 2007,2008,2009,2010,2011,2012,2013 |
