Exhaust Gas Temperature Sensor – Jeep Grand Cherokee Mk4 – 68148173AA

Restore reliable DPF regeneration and emission control on your Jeep Grand Cherokee MK4 3.0crd V6 with this direct-replacement exhaust gas temperature sensor — also known as the exhaust temp sensor, DPF temperature sensor or thermocouple. Built to OEM specification and matching part numbers 68193645AB, K68193645AB, 68148173AA, 68193645AA and 68383247AA. Also fits equivalent Chrysler models.

Common signs of failure

A failing EGT sensor on diesel vehicles typically triggers the check engine light with codes P0544, P242F, P0546 or P0549, plus DPF-related warnings on the dashboard. Symptoms include the DPF light staying on, failed or incomplete regeneration cycles, the vehicle entering limp mode after motorway driving, and unusually high exhaust temperatures on diagnostic live data. Left unaddressed, a faulty sensor can lead to DPF damage that costs many times the price of the sensor.

Fitment notes

Direct-fit replacement, no diagnostic coding required. Some installations need a deep socket or EGT-specific spanner to clear the exhaust pipework. Apply anti-seize compound to the threads before fitting and torque to manufacturer spec — exhaust heat-cycling locks fasteners over time. Standard 2 wire connector.

Frequently asked questions

Where is the EGT sensor located?

Most diesels have multiple EGT sensors monitoring temperature before the turbo, before the DPF, and after the DPF. Identify which position the fault code refers to before ordering.

Will replacing it stop my DPF light?

If the EGT sensor was causing the ECU to misjudge exhaust temperature and abort regeneration, yes. After fitting, drive on the motorway for 20+ minutes to allow a full regeneration cycle.

Can a faulty EGT sensor damage my DPF?

Yes — incorrect temperature readings can cause the ECU to either skip needed regenerations or trigger regen at the wrong time, leading to DPF blockage or melted substrate.