Fuel Pressure Relief Valve – Mitsubishi L200 – 98032549

This direct-fit fuel pressure relief valve (rail pressure relief valve / fuel rail relief valve) restores safe fuel pressure relief and reliable cold starting on the Mitsubishi L200. Built to OEM specification and matching part numbers 98032549, 8-98032549-0, 095420-0281, 98032549-0 and 095420-0260. Also fits equivalent Nissan models.

Common signs of failure

A failing fuel pressure relief valve typically causes hard cold starting, prolonged cranking, fault code P008A (low pressure fuel system - pressure too low), and on common-rail diesels the engine dropping into limp mode under load. Drivers often notice fuel pressure dropping rapidly after engine shut-off — the valve fails open, bleeding off the rail's residual pressure between starts.

Fitment notes

Direct-fit replacement, threaded into the fuel rail. Relieve fuel pressure before removal. Apply new sealing washers if supplied and torque carefully — over-tightening can crack the rail. After fitting, cycle the ignition to prime, clear codes and verify the rail holds pressure.

Frequently asked questions

Is this the same as the SCV?

No — the SCV regulates fuel entering the pump, while the relief valve protects the rail from over-pressure on the outlet side. Both common-rail components but with different functions.

Why does my engine start hot but not cold?

When a relief valve fails open, the rail bleeds pressure overnight. Hot starts succeed because warm fuel vapourises and assists ignition; cold starts fail because there's no residual pressure for the first injection cycle.

Will replacing it fix my P008A code?

If the code points specifically to the relief valve, yes. Some vehicles also throw P008A from SCV faults, so confirm with live pressure data before ordering.